Maximize The Efficiency Of The Water Heating With Our Hot Water System

Dpstar Group is the trusted leader in instantaneous hot water generation, distribution and precision temperature control. With in-depth knowledge and experience that spans more than a century, Dpstar understands your industry’s hot water system dynamic in ways no one else can.

The demand for process heating and temperature control in the industry continues to increase as manufacturers and industrial facilities grow, expand, and seek to improve their existing operations. These process heating systems must perform consistently, safely, and with minimal downtime over time. Hot water is an essential building service used for washing, cleaning, drinking, cooking, heating and so on. It requires energy to heat water, and the type of hot water system installed in a building has a direct impact on its energy consumption. The main design considerations are the fuel type that will be used, whether the hot water will be generated locally or centrally and whether it will be stored, or generated on demand.

Dpstar Does It All

We can solve your problems and prevent them with a packaged solution designed specifically for your unique parameters. From a full range of state-of-the-art products to a complete, fully integrated hot water system for a new facility, or custom-engineering and turnkey solutions for each of your existing plants worldwide, Dpstar is your single source solution.

What is Water Heating?

Water heating is a heat transfer process that uses an energy source to heat water above its initial temperature. Typical domestic uses of hot water include cooking, cleaning, bathing, and space heating. In industry, hot water and water heated to steam have many uses. Water heaters are used to transform thermal energy from a fuel source to a stream or reservoir of water. They can be described by their fuel source or may be one of several specific types of heaters. They can be configured to operate in-line, to heat re-circulated streams of water, for direct immersion in an open tank or vessel, or to operate as a booster heater to increase the fluid stream temperature at or near its point of use. The selection of water heaters should be done on the basis of their type, application and heating capacity. Other important specifications to consider include the energy source and ratings.

Inline Heater Operations

Inline water heaters (circulation heaters) are ideal for processing fluid, including hazardous liquids, that requires intermediate heating while maintaining a flow rate. Instead of stripping the heat from another source as it would for a heat exchanger, an Inline water heater simply transfers the heat generated from electrical power into the target fluid.

The main characteristics of the inline heater are for efficient heat transfer, the easiness to install and to maintain, and its high range compatibility with the current standard industrial piping. Applications such as waste oil, steam and water processing can use in line heaters in order to regulate and control the temperature, but also to maintain the fluid viscosity.

An improper liquid viscosity could gradually slow down the overall processing time of the production. In addition, the product’s final yield and purity could also be affected by a slight deviation of the viscosity. To avoid this type of problem, a heater inline is used to heat the fluid so that at the proper temperature, the viscosity remains unchanged and at the same time to process the medium at a desirable steady flow rate. To control the liquid flow rate of the heater, the wattage can be manipulated and regulated to obtain the desired temperature (in other words, the flow rate is directly proportional to the temperature/liquid viscosity).

Why Choose Us?

Dpstar Water Heater Systems are designed to provide energy-efficient, clean heat and they offer impressive operational reliability and system availability. These features are essential for heating centres in large industrial plants and buildings. Our industrial hot water systems can accommodate a wide range of customer specifications, so regardless of your heating needs, we will have the right solution for you.  With their cutting-edge design and configuration, our Dpstar range of industrial hot water systems can be used across a wide range of applications. To help ensure you get the right industrial water heater for your premises, we offer thorough consultations.

Thanks to the many design features specific to Dpstar water heaters, as well as our extensive knowledge and experience, we are able to ensure a long service life, outstanding quality and high levels of operational reliability. When you choose a Dpstar water heater system, you can rest assured you’re benefiting from the very best. The water heater system in our range feature the latest in heating technology, defining the quality benchmark for other manufacturers. They are made from high grade materials and are designed and built to be long-lasting.

Our Success Stories

Dpstar Group is a leading provider of water heater system, parts, and supporting services. We offer high-quality equipment that supports the energy, heating, and process needs of our customers in a broad spectrum of industries. The unique design and configuration of Dpstar hot water heater system allows them to deliver the best possible conditions for meeting individual customer requirements across a broad range of applications.

Product Overview

Dpstar successfully design and built 120 KW Water Heater System for Gardenia Bakeries. We can provide integration of the heater and control with other processing components and instruments such as control panels, valves, pumps, blowers, piping, sensors, and expansion tanks, allowing for a turnkey heating solution. Our Industrial Inline heaters minimize heat loss during a process flow while still maintaining a high and efficient heat transfer rate. With localized heating, in-line heaters can heat liquid or gases quickly and efficiently.

Item Supplied

• Power Rating: 415V – 120KW
• Dimension: 1505mmL x 1545mmH x 605mmD
• Heater Size: 11.2mm Ø x 1000mm U‐Lg. x 12 elements
• Heater Material: Stainless Steel SUS304

Dpstar has the engineering, design, and manufacturing capability to provide value-added process heating system solutions. Skid mount, control panels, and other processing components and instruments such as valves, pumps, blowers, piping, temperature sensors, temperature transmitters, and expansion tanks can be provided. For more information or to find Dpstar representative in your area, visit our website at www.dpstar.com.my.

Dpstar Group
No 35, Jalan OP ½, Pusat Perdagangan One Puchong,
Off Jalan Puchong, 47160 Puchong,
Selangor Darul Ehsan, Malaysia.
Email: [email protected]

Connect with Dpstar Group!
Follow Dpstar’s social media to stay updated with our latest news.