PR Electronics 6335A – 2-Wire HART Transmitter

Features

  • RTD, TC, Ohm, or mV input
  • Extremely high measurement accuracy
  • HART 5 protocol
  • Galvanic isolation
  • 1- or 2-channel version
Enquiry
Categories: ,
Love0

PR Electronics 6335A – 2-Wire HART Transmitter

Application

  • Linear temperature measurement using Pt100…Pt1000, Ni100…Ni1000, or TC sensors.
  • Calculating temperature differences or averages between 2 resistance or TC sensors.
  • Converting varying linear resistances to standard analog current signals, such as from valves or Ohmic level sensors.
  • Amplifying bipolar mV signals to standard 4…20 mA current signals.
  • Connecting up to 15 channels with HART communication via digital 2-wire signals.

Technical specifications:

  • Quickly programmable for temperature measurement across all defined norms.
  • RTD and resistance inputs feature cable compensation for 2-, 3-, and 4-wire connections.
  • Designed with stringent safety standards suitable for SIL installations.
  • Output signal limits can be programmed.
  • Continuous monitoring of vital stored data for safety.
  • Sensor error detection compliant with NAMUR NE89 guidelines.

Mounting and installation:

  • Can be mounted vertically or horizontally on a DIN rail; the 2-channel version supports up to 84 channels per meter.
  • Configurable via standard HART interfaces or PR 5909 Loop Link.
  • Suitable for installation in zone 2, 22 / Class I, Division 2, Groups A, B, C, D.

Specification

ENVIRONMENTAL CONDITIONS
Operating temperature -40°C to +85°C
Storage temperature -40°C to +85°C
Calibration temperature 20…28°C
Relative humidity < 95% RH (non-cond.)
Protection degree IP20
MECHANICAL SPECIFICATIONS
Dimensions (HxWxD) 109 x 23.5 x 104 mm
Weight (1 / 2 channels) 145 / 185 g
DIN rail type DIN EN 60715/35 mm
Wire size 0.13…2.08 mm2 AWG 26…14 stranded wire
Screw terminal torque 0.5 Nm
COMMON SPECIFICATIONS
Supply
Supply voltage 8.0…35 VDC
Internal power dissipation, 1 / 2 ch. 19 mW…0.8 / 1.6 W
Isolation voltage
Isolation voltage, test / working 1.5 kVAC / 50 VAC
Response time
Response time (programmable) 1…60 s
Voltage drop 8.0 VDC
Warm-up time 30 s
Programming Loop Link & HART
Signal / noise ratio Min. 60 dB
Accuracy Better than 0.05% of selected range
Signal dynamics, input 22 bit
Signal dynamics, output 16 bit
Effect of supply voltage change < 0.005% of span / VDC
EMC immunity influence < ±0.1% of span
Extended EMC immunity: NAMUR NE21, A criterion, burst < ±1% of span
INPUT SPECIFICATIONS
Common input specifications
Max. offset 50% of selected max. value
RTD input
RTD type Pt100…1000, Ni100…1000, lin. R
Cable resistance per wire 5 Ω (up to 50 Ω per wire is possible with reduced measurement accuracy)
Sensor current Nom. 0.2 mA
Effect of sensor cable resistance (3-/4-wire) < 0.002 Ω / Ω
Sensor error detection Yes
Linear resistance input
Linear resistance min….max. 0 Ω…7000 Ω
TC input
Thermocouple type B, E, J, K, L, N, R, S, T, U, W3, W5
Cold junction compensation (CJC) < ±1.0°C
Sensor error detection Yes
Sensor error current: When detecting / else Nom. 33 μA / 0 μA
Voltage input
Measurement range -800…+800 mV
Min. measurement range (span) 2.5 mV
Input resistance 10 MΩ
OUTPUT SPECIFICATIONS
Current output
Signal range 4…20 mA
Min. signal range 16 mA
Load (@ current output) ≤ (Vsupply – 8) / 0.023 [Ω]
Load stability ≤ 0.01% of span / 100 Ω
Sensor error indication Programmable 3.5…23 mA
NAMUR NE43 Upscale/Downscale 23 mA / 3.5 mA
Common output specifications
Updating time 440 ms
of span = of the presently selected range
OBSERVED AUTHORITY REQUIREMENTS
EMC 2014/30/EU
ATEX 2014/34/EU
RoHS 2011/65/EU
EAC TR-CU 020/2011
EAC Ex TR-CU 012/2011
APPROVALS
ATEX KEMA 09ATEX0148 X
IECEx KEM 10.0084X
CSA 1125003
FM FM17US0013X
EAC Ex RU C-DK.HA65.B.00355/19
SIL Hardware assessed for use in SIL applications

Download

PR-Electronic-6335A-2-wire-HART-transmitter_DpstarGroup

Related products