Evikon E2658-PID Flameproof Solvent Vapours Detector Transmitter

Features

  • Highly sensitive Photo Ionization Detector
  • Wall mount robust flameproof metal enclosure
  • Suitable for ATEX Zones 2 and 22
  • Two analog outputs settable to 4-20 mA or 0-10 V
  • RS485 Modbus RTU digital interface
  • Relay option
Enquiry
Category:

Dpstar is an authorized distributor of Evikon. Evikon is an instrumentation company, specializing in the development, manufacturing, and marketing of sensor-based electronic measurement instruments for industrial and building automation applications. Our mission is to provide businesses and organizations with convenient and efficient technical solutions for the measurement of environmental parameters and control of processes – temperature, pressure, level, humidity, and moisture, toxic and explosive gases – to help save resources, increase production quality and ensure safety.

E2658 series is a new line of flameproof detectors-transmitters intended for use in ATEX Zones 2 and 22.  E2658 series devices are based on PluraSens® multifunctional platform. Solvent vapors transmitter E2658-PID utilises highly sensitive photoionization detectors (PID) with extremely low minimal detection levels. The transmitter exhibits sensitivity to compounds with ionization potential less than 10.6 eV, i.e. to most solvent vapors. Two relays with closing contact (optional) may be used for remote signalling or concentration control. Two alarm set-points are user settable. Two analog outputs and RS485 digital interface with industry standard Modbus RTU protocol can be used to connect the detector to safety or building automation systems.

Dimension

Specification

Detected vapors acetone, ethanol, toluene, xylene etc
Default calibration isobutylene
Sensor type Photo Ionization Detector
Sampling method diffusion
Detection range 0…40 ppm isobutylene
0…200 ppm isobutylene
Resolution 1 ppb C4H8 for 40 ppm range
1 ppm C4H8 for 200 ppm range
Sensor lifetime 5 years
Power supply 12…36 VDC (default),
24 VAC or 230 VAC as options
Digital interface RS485, Modbus RTU protocol
Analog outputs 2 × 4-20 mA / 0-10 V, user settable
Output relays (option) 2 × SPST relays (closing contact),
250 VAC / 30 VDC, 5 A max
Enclosure die-cast aluminium, wall mount, IP66
Dimensions H80 × W125 × D57 mm
Operating conditions -40…+55 °C, < 95 %RH
safe areas and ATEX Zones 2 and 22