Handheld Process Signal Calibrator – AOIP CP 6632


  • High precision: 0.015% of reading for an adjustable resolution of 1 mV and 1 µA
  • Display in A, mV and%
  • Low temperature coefficient: 15 ppm / ° C in voltage and 20 ppm / ° C in current
  • Active or passive loop power
  • Measurement with HOLD function
  • Simulation of ramps, preprogrammed steps, synthesizer values
  • Minimum, maximum and average display
  • Backlight

The CP 6632 is a high precision process signal calibrator (150 ppm of reading) capable of measuring and generating currents and voltages. Simple and robust, this tool has been designed to simplify maintenance and commissioning of sensors and transmitters using process signals such as 4-20 mA or 0-10 V.

The CP 6632 is suitable for different working modes in the process world thanks to scaling and different specific calibers. The process calibrator also emits ramps and increments as well as fixed values ​​intended for the verification of transmitters, indicators, recorders.

The temperature coefficients are very low: 15 ppm / ° C in voltage and 20 ppm / ° C in current. Precision is kept even in difficult temperature conditions, on site for example.

As standard CPs are delivered with 4 AA type batteries. The battery charger option uses a rechargeable battery pack directly from the mains.


Dimensions L x W x H 157 x 85 x 45 mm
Mass 306 g
Screen 160 x 160 pixel graphic LCD display with backlight
Display of measurements in table form or trend line
Food 4 AA 1.5 V batteries or rechargeable Ni-Mh battery with optional built-in charger
> 53 h in voltage and current measurement and voltage simulation
> 12 h in current simulation
Communication interfaces USB
Reference area 23 ° C ± 5 ° C (RH: 45 to 75% non-condensing)
Nominal operating range -10 to 50 ° C (RH: 20 to 80% non-condensing)
Operating limit range -15 to 55 ° C (RH: 10 to 80% non-condensing) (70% at 55 ° C)
Storage conditions -30 ° C to + 60 ° C
Operating altitude 0 to 2200 m
Protection sign IP54 according to EN60529
Protections • Electronics: Up to 250 V on ‘voltage’ wires
• By fuse on the ‘current’ wires
• Against the opening of the ‘current’ circuit in measurement of inductive resistances
Classroom Complies with European standard EN 61010-1
Category II, pollution 2
Assignment voltage with respect to earth 60 V
Shock and vibration resistance EN 61010-1
EMC compliance Immunity:
• Electrostatic discharges: EN 61000-4-2
• Radiated fields: EN 61000-4-3
• Shock waves: EN 61000-4-5
• Conducted disturbances: EN 61000-4-6
• Voltage dip: EN 61000-4-11
• Salvo: EN 61000-4-4Radiated emission and conduct:
• EN 55022, class B
• EN 61000-3-2
• EN 61000-3-3


AOIP CP 6632 Handheld process signal calibrator-DpstarGroup


There are no reviews yet.

Be the first to review “Handheld Process Signal Calibrator – AOIP CP 6632”

Your email address will not be published.