Mechanical Pressure Gauges | Heavy Duty – Tecsis P1651 / P1653 / P1661 / P1663

Features

  • Protection class IP 54
  • Up to 10-fold overload capacity
  • Can be used under Ex-conditions with inductive alarm contacts
  • Up to four alarm contacts possible
  • With SVA-amplifier suitable for SPS control units
  • Limit value signalling by magnetic snap-action or inductive contacts
  • Connection position bottom radial
Enquiry

The design principle and material selection of the diaphragm pressure gauges allow them to meet the stringent demands occurring above all in industrial service. Special corrosion resistant materials are used for service with chemically aggressive media. Open process connections ensure that the gauges are easy to clean with highly viscous or crystallizing process media, thus guaranteeing process reliability.

As a result of the high actuating forces, pressure gauges with diaphragms are particularly suitable for connection of electric alarm contacts. Electric alarm contacts open and close circuits in response to the position of the pressure gauge pointer.

Magnetic snap-action electric alarm contacts are used in adverse operating conditions. The high contact pressure and the selection of various contact materials result in reliable and cost-effective solutions, above all when high currents have to be switched. Signal output does however take place slightly in advance of or lagging slightly behind the motion of the actual value pointer. If the electrical switching capacities of the alarm contacts are exceeded or not reached, a relay is to be used to provide an appropriate current rating.

Inductive electric alarm contacts have an almost unlimited service life, as the signal is switched without physical contact. Closing or opening takes place without any feedback effect on the measuring system, precluding any signal lead or lag. A corresponding control unit is always required for operation. Units with inductive contacts may be operated in areas with potentially explosive atmospheres, assuming compliance with existing specifications.

Applications

  • Mechanical engineering, plant and apparatus construction
  • Building services

Specification

Nominal size ND 100 and ND 160
Measuring ranges 0 … 25 mbar to 0 … 40 bar

Download

Tecsis P1651-P1653-P1661-P1663 – Mechanical Pressure Gauges – Heavy Duty-DpstarGroup

Reviews

There are no reviews yet.

Be the first to review “Mechanical Pressure Gauges | Heavy Duty – Tecsis P1651 / P1653 / P1661 / P1663”

Your email address will not be published.