Mechanical System Thermostats For Heating Cables – Flexelec FX/AT2 – FX/AT – FX/ST

Features

  • Designed for heating cable, heating tape, and flexible heating elements.
  • The current applications where these thermostats could be used are freeze protection and temperature maintenance.
  • The heating element is energised only when necessary.
  • The heating cable lifetime is increased.
  • The heating cables will not overheat.
  • The energy consumed is kept to a minimum.
Enquiry

Through our deep knowledge and experience, we are able to supply electrical heat tracing systems and solutions to achieve both dynamic heat up and temperature maintenance applications in Oil and Gas, Palm Oil, Food Industry, and others. We understand your requirements and we are specialists in Electrical Heat Tracing solutions and provide reliable systems and solutions. Dpstar is responsible, trustworthy, and accountable you can count on.

Thermostats For Heating Elements 

Temperature control systems are essential in heating cables installations. Dpstar provides a range of electronic and mechanical thermostats to answer your temperature control needs. These regulation systems limit the energy necessary for the efficiency of your installations and extend the lifetime of your heating elements.

These thermostats are designed for heating cable, heating tape, and flexible heating elements. The current applications where these thermostats could be used are freeze protection and temperature maintenance

In order to maintain the right temperature, a control device will provide the following advantages:

  • The heating element is energised only when necessary.
  • The heating cable lifetime is increased.
  • The heating cables will not overheat.
  • The energy consumed is kept to a minimum.

FX/AT2 ambient thermostat
To protect vessels and piping from freezing, this thermostat is preset at + 3°C.

FX/AT ambient thermostat
To protect vessels and piping from freezing, this thermostat can be set from – 5°C to + 40°C.

FX/ST bulb thermostat and capillary tube
The stainless steel bulb and capillary tube allow the temperature at the surface of the vessel or the piping to be read. Three temperature ranges from – 5°C to + 220°C. The control device is recommended to ensure that the heating elements enjoy a long service life and to save energy

Specification

Model FX/AT2
ambient thermostat
FX/AT
ambient thermostat
Temperature range preset to + 3°C – 5°C to + 40°C
Current rating 5 A 16 A
Box protection level IP 65 IP 65
Box dimensions 80 x 80 x 45 mm 125 x 125 x 75 mm
Accuracy ± 3°C ± 2.5°C
Differential 5°C 2.5°C
Connection 2 inputs with cable gland
Voltage 220 V / 240 V
Model FX/ST – 40 FX/ST – 120 FX/ST – 220
Temperature range – 5°C to + 40°C + 20°C to + 120°C + 20°C to + 220°C
Accuracy + 4°C at + 40°C + 5°C at + 120°C + 10°C at + 220°C
Differential 2.5°C 5°C 7°C
Capillary tube length 1.2 m
Bulb dimensions 155 mm x 0.6 mm 86 mm x 0.6 mm 211 mm x 0.3 mm
Max. bulb temperature + 77°C + 202°C + 262°C
Bulb and capillary tube material Stainless steel
Current rating 16 A
Box material Polycarbonate
Protection level IP 65
Box dimensions 175 x 125 x 75 mm
Max. box temperature + 50°C
Voltage 220 V / 240 V

Reviews

There are no reviews yet.

Be the first to review “Mechanical System Thermostats For Heating Cables – Flexelec FX/AT2 – FX/AT – FX/ST”

Your email address will not be published.