Photo Sensor - Hanyoung Nux PE Series

Specification

MODEL		PE-T5D	PE-R05D	PE-M3D
Appearance
Detection		Through beam	Diffuse feflection	Retro reflection
Sensing distance		5 m	500 m	0.1 m – 3 m
Detecting object		Substance (over 20 mm)	White no-glossy paper (500×500 mm)	Substance (overØ60 mm)
Power supply		24 – 240 V AC (50/60 ㎐) / 24 – 240 V DC
Current Consumption		Trns : 0.7 W / Rcvr : 1.2 W	Max. 2 W	Max. 1.6 W
Operation mode		Dark : ON	Light : ON	Dark : ON
Control Output		Relay output 1c 250 V AC 2 A(Resistive load)
Response time		Max. 25 ms
Hysteresis		–	Max. 20 %	–
Light source		Infrared LED ( Modulated )
LED		Operation indicator : Red LED (Red LED of through beam type transmitter is the power indicator)
Sensitivity adjustment		–	By the sensitivity adjusting volume
Material	Case	Polycarbonate
	Lens
Connection		Flying lead. 1 m Length ( φ6.5 )
		Trns : Power (Red) Rcvr : Operation (Red)	Operation(Red)
Ambient illumination		Sunlight : 11,000 Lux max, Incandescent lamp : 3,000 Lux max
Ambient temperature		operating : -20 ~ 60 ℃, Storing : -25 ~ 70 ℃ (With no condensation)
Protective structure		IP 54( IEC )
Vibration resistance		10 – 55 ㎐, Double amplitude : 1.5 mm, for 2 hours each X, Y and Z directions
Dielectric Strength		1,500 V a.c, for 1 min
Insulation resistance		100 MΩ min (500 V d.c mega standard)
Weight		Transmitter and receiver each Approx. 120 g)	Approx. 120 g

Note1)The sensing distance can be varied depending on the size, surface condition, glossy, non-glossy of the sensing object.

Note2)PE-TL5D is transmitter and PE-TR5D is receiver with the through beam type.

Note3)Sensing range of PE-M3D is the distance when HY-M5 (Mirror) is used.