Hanyoung Nux PY Series – Photo Sensor

Features

  • Light ON / Dark ON mode switching selection by control wire
  • 1 ms response time
  • Display control output/stable output
  • Built in output cutoff protecting circuit
  • Compact size so simple installation (16X28X8 mm)
  • Built in reverse connection of power protecting circuit
Enquiry
Category:

Hanyoung Nux PY Series Photo Sensor, featuring an IP67 structure for partial waterproofing, should not be submerged in water at any time. If the lens becomes contaminated with foreign substances, it’s recommended to clean it with a dry cloth, avoiding the use of thinner or organic solvents.

Photo Sensor
Model : PY Series

  • Light ON / Dark ON mode switching selection by control wire
  • 1 ms response time
  • Display control output/stable output
  • Built in output cutoff protecting circuit
  • Compact size so simple installation (16X28X8 mm)
  • Built in reverse connection of power protecting circuit

Specification

Model NPN PY-T3N
PNP PY-T3P
Sensing mode Through – beam
Sensing distance 3 m
Sensing object Ø5 mm min. opaque object
Min. sensing object Ø2 mm min. opaque object (3 m standard)
Hysteresis distance None
Power voltage 12 – 24 V d.c. ± 10%
Current consumption Emitter: 10 mA max. , Receiver: 15 mA max.
Control output NPN or PNP open collector output
Load current: 100 mA max. (26.4 V d.c. standard)
Residual voltage – NPN: 1V max. , PNP: 1V max.
Operation mode Light ON / Dark ON mode switching selection by control wire (receiver only)
Response time 1 ms max.
Light source
(wavelength)
Infrared LED (850 nm)
LED Red LED: control output, green LED: stability indication
(However, emitter red LED: power indication)
Protecting circuit Power reverse connection protecting circuit and
output break overcurrent protecting circuit.
Output break (note 1), output failure (note 2) notification functions
Ambient illumination Sunlight : 11,000 Lux max. , Incandescent lamp : 3,000 Lux max.
Ambient temperature -20 ~ 60 ℃ (storage ambient temperature : -25 ~ 70 ℃)
Ambient humidity 35 ~ 85 % RH (without condensation)
Protection rating IP 67 (IEC)
Insulation resistance 20 MΩ min. (500 V d.c. mega standard)
Noise immunity Square wave noise by noise simulator (pulse width: 1 μs) ± 240 V
Dielectric strength 1,000 V a.c. (50/60 Hz for 1 minute)
Vibration resistance 10 – 55 Hz, double amplitude: 1.5 mm, for 2 hours in X, Y ,Z directions
Shock resistance 500 m/²s, 3 times in each X, Y,Z directions
Certifications CE
Connection method Wire extended type
Connection
specifications
Ø3 mm, 4-core, 2 m (emitter: Ø3 mm, 2-core, 2 m)
Materials Case : PC, Lens : PC
Weight approx. 66g

Ordering Code

Model Number Contents
PY- Slim type Photo Sensor
Sensing mode T Through-beam
Sensing distance 3 3 m
Control output N NPN open collector output
P PNP open collector output

Download

Hanyoung Nux PY Series – Photo Sensor-DpstarGroup