Ecostar Eco5-TP4V030-24J – SCR | Eco5-TP | Three Phase Thyristor Power Regulator (30Amp)

Product features

• Independent Adjustment: Max and BIAS settings can be independently adjusted.
• User-Friendly Design: Down-opened panel facilitates easy fuse replacement.
• Front Panel Adjustments: VR of Max and SFS are accessible from the front panel for easy adjustments.
• Clear Operation Display: Multi-LED display panel clearly shows the operating conditions.
• Independent Control: Auxiliary powers (AC1, AC2) are independently controlled for all models.
• Buffered Output Adjustment: Built-in buffering output adjustment (SFS VR) with a range of 1 to 22 seconds (specific to phase control products).
• Safety and Aesthetics: Top and bottom shielding covers enhance safety and provide a fashionable appearance, also simplifying wiring installation.
• Power Loss Protection: In the event of a 0.5 Hz sudden power loss, the system output can be switched off immediately. Once power is restored, the system buffers the output to prevent voltage surges and fuse burn-down.
• Universal Power Specification: Compatible with 200~480VAC main power.
• Automatic Frequency Detection: Supports 50~60 Hz without the need for manual selection or switching.
• Fault Detection and Alarms: Automatically detects and displays power out-of-phase, SCR overheating, and fuse burn-down, with one set of alarm dry contact output.
• Immediate Response to Malfunctions: In cases of SCR overheating or fuse burn-down, the system output stops immediately. Once the issue is resolved and power is restored, the system buffers the output to prevent fuse burn-down.
• Versatile Control Signals: Ready to use with various control signals including 420mA, 15VDC, 210VDC, 020mA, 05VDC, 010VDC, and dry contact points.
• Separate Triggering Circuit and Main Board: Designed separately to prevent main board damage during main circuit malfunctions.
• Easy Replacement: European detachable control signal connector allows easy replacement without re-wiring.

Outline description

Installation and ambient conditions

• Heat Management: Install the system vertically and ensure empty space on both sides to prevent continuous temperature rise inside the regulator.
• Ventilation: Ensure the control box has ventilation holes, following the principle of heat rising, or install extra cooling fans.
• Environment: Avoid high temperature or poorly ventilated areas; otherwise, set the maximum operating capacity below 70% of the nominal capacity.
• Corrosive Environments: Avoid areas with heavy water evaporation, acid, alkaline, or corrosive air.
• Humidity: Maintain ambient humidity below 90% RH (no condensation).
• Temperature: Operate within an ambient temperature range of -10°C to 45°C.