Ecostar Eco5-TP4V060-24J – SCR | Eco5-TP | Three Phase Thyristor Power Regulator (60Amp)

Features

  • Independent adjustment of Max and BIAS.
  • Down-opened Panel, easy for fuse replacement.
  • VR of Max and SFS are installed in the front panel, easy for adjustment.
  • Multi-LED display panel makes the operating condition clear.
  • The auxiliary powers (AC1, AC2) are independently controlled for all models.
  • Build-in buffering output adjustment (SFS VR), adjusting range 1~22 seconds. (Only for the phase control product)
  • Top & bottom shielding covers are designed for safety and fashion out looking, also easy for wiring installation.
Enquiry
Categories: ,
Love0

Ecostar Eco5-TP4V060-24J SCR, part of the Eco5-TP series, is a three-phase thyristor power regulator with a 60Amp capacity. Here are its key features:

  • Independent adjustment for Max and BIAS settings.
  • Easy fuse replacement with a down-opened panel design.
  • Front-panel installation of VR for Max and SFS for easy adjustment.
  • Clear operating condition display with a multi-LED panel.
  • Independent control of auxiliary powers (AC1, AC2) for all models.
  • Built-in buffering output adjustment (SFS VR) with a range of 1 to 22 seconds (specific to phase control products).
  • Top and bottom shielding covers for safety, aesthetics, and simplified wiring installation.
  • Immediate system output switch-off in case of sudden power loss of 0.5 Hz to prevent voltage surges and fuse burn-down, with subsequent buffering upon power restoration.
  • Main power specification designed for 200~480VAC.
  • Automatic power frequency detection for 50~60 Hz without the need for manual selection or switching.
  • Automatic detection and display of power out-of-phase, SCR overheating, and fuse burn-down, with alarm dry contact output.
  • Immediate system output stoppage in cases of SCR overheating or fuse burn-down, with buffering upon malfunction elimination and power restoration.
  • Various control signals ready for use, including 420mA, 15VDC, 210VDC, 020mA, 05VDC, 010VDC, and dry contact points.
  • Separate design for triggering circuit and main board to prevent main board damage during main circuit malfunctions.
  • European detachable control signal connector for easy replacement without rewiring.

Outline description

Installation and ambient conditions

  • Install the power regulator vertically to allow heat dissipation, leaving space on both sides to prevent excessive internal temperature rise.
  • Ensure ventilation holes or additional cooling fans follow the principle of hot air rising for effective cooling.
  • Avoid installation in high-temperature or poorly ventilated areas to maintain maximum operating capacity at or below 70% of the nominal capacity.
  • Avoid installation in areas with heavy water evaporation, acidic, alkaline, or corrosive air.
  • Maintain ambient humidity below 90%RH (no condensation) and ambient temperature between -10°C and 45°C.

                   

Download

ecostar eco5-TP4V060-24J – SCR eco5-TP – Three Phase Thyristor Power Regulator (60Amp)-DpstarGroup

Related products