Ecostar Eco5-TP4V080-24J – SCR | Eco5-TP | Three Phase Thyristor Power Regulator (80Amp)

Features

  • Independent adjustment of Max and BIAS.
  • Down-opened Panel, easy for fuse replacement.
  • VR of Max and SFS are installed in the front panel, easy for adjustment.
  • Multi-LED display panel makes the operating condition clear.
  • The auxiliary powers (AC1, AC2) are independently controlled for all models.
  • Build-in buffering output adjustment (SFS VR), adjusting range 1~22 seconds. (Only for the phase control product)
  • Top & bottom shielding covers are designed for safety and fashion out looking, also easy for wiring installation.
Enquiry

Ecostar Eco5-TP4V080-24J – SCR | Eco5-TP | Three Phase Thyristor Power Regulator (80Amp)

Product features

  • Individual adjustment for Max and BIAS.
  • Easily accessible panel for fuse replacement.
  • Front panel installation of VR for Max and SFS for convenient adjustment.
  • Multi-LED display panel for clear operational status.
  • Independent control of auxiliary powers (AC1, AC2) for all models.
  • Phase control products feature built-in buffering output adjustment (SFS VR), with an adjustment range of 1 to 22 seconds.
  • Safety and aesthetic design with top and bottom shielding covers, facilitating wiring installation.
  • Instant system output switch-off in the event of sudden power losses of 0.5 Hz, with subsequent buffering upon power restoration to prevent voltage surges and fuse damage.
  • Designed for a main power specification of 200~480VAC.
  • Automatic power frequency detection for 50~60 Hz without the need for manual selection or switches.
  • Automatic detection and display of power out-of-phase, SCR overheating, and fuse burn-down, with corresponding alarm dry contact output.
  • Immediate system output halt in case of SCR overheating or fuse burn-down, with subsequent buffering upon issue resolution to prevent further damage.
  • Various control signal options including 420mA, 15VDC, 210VDC, 020mA, 05 VDC, 010VDC, and dry contact points, readily available for use.
  • Separate design for triggering circuit and main board to protect against main board damage during main circuit malfunctions.
  • European detachable control signal connector for easy replacement without requiring rewiring.

Outline description

Installation and ambient conditions

  • The power regulator generates heat during operation, thus it should be installed vertically with space on both sides to prevent continuous temperature rise inside.
  • Ventilation holes in the control box should be installed following the principle of hot air rising or with additional cooling fans.
  • Avoid installation in areas with high temperatures or poor ventilation, or else the maximum operating capacity should be set below 70% of the nominal capacity.
  • Avoid installation in areas with high water evaporation, acidic, alkaline, or corrosive air.
  • Ambient humidity should be below 90%RH without condensation.
  • Ambient temperature range: -10°C~45°C.

Download

ecostar eco5-TP4V080-24J – SCR eco5-TP – Three Phase Thyristor Power Regulator (80Amp)-DpstarGroup