Screw Clamp Terminal Blocks – Stud / Bolt – Connectwell CBS4U

Feature

M4 sized Stud Type Terminal Blocks, suitable for operation with screwdriver.

This Terminal Block is preferred for applications where the connections are subjected to severe vibrations.

The wire is crimped to a ring / fork type lug (ferrule) and is screwed on to the flat current bar on the Terminal Block. cross connection can be achieved with the aid of internal shorting links.

It is recommended to use Protective Covers in transparent plastic to fully shroud these assemblies. Wiring can be done with the help of screw driver as well as nut driver.

 

Enquiry
Category:
M4 sized Stud Type Terminal Blocks, suitable for operation with screwdriver.

This Terminal Block is preferred for applications where the connections are subjected to severe vibrations.

The wire is crimped to a ring / fork type lug (ferrule) and is screwed on to the flat current bar on the Terminal Block. cross connection can be achieved with the aid of internal shorting links.

It is recommended to use Protective Covers in transparent plastic to fully shroud these assemblies. Wiring can be done with the help of screw driver as well as nut driver.

Specification

 

TECHNICAL DATA

Rated Voltage 1100 V
Rated Current 57 A
Tightening Torque 1.2 Nm
Housing Material Polyamide
Product Function Feed Through
Wire Entry Orientation Side Entry
Mounting Possibility DIN 32/DIN 35/DIN 35-15 Rail
Screw Size M4
Operated by Screw Driver
Rated Surge Voltage 8 KV
Pollution Degree 3

CONNECTION DATA

Conductor Cross Section Stranded min. 1.5 mm²
Conductor Cross Section Stranded max. 10 mm²
Conductor Cross Section AWG/Kcmil min 16 AWG
Conductor Cross Section AWG/Kcmil max 6 AWG
Conductor Cross Section Stranded with Ferrule/Lug min 1.5 mm²
Conductor Cross Section Stranded with Ferrule/Lug max 10 mm²
2 Conductors with same Cross Section Stranded min 1.5 mm²
2 Conductor with same Cross Section Stranded max 6 mm²
Conductor Cross Section Solid min 1.5 mm²
Stripping Length mm

DIMENSIONS

Height with DIN 15 x 5 mm rail mm
Height with DIN 32 rail 43 mm
Height with DIN 35 x 15 mm rail 45.4 mm
Height with DIN 35 x 7.5 mm rail 37.9 mm
Length 49 mm
Width (Thickness) 13 mm

Ordering Code

CAT. NO. DESCRIPTION STD. PACK
CBS4U 10 sq.mm Stud Type Terminal Block in Grey colour 100
CBS4UR 10 sq.mm Stud Type Terminal Block in Red colour 100
CBS4UY 10 sq.mm Stud Type Terminal Block in Yellow colour 100
CBS4UBU 10 sq.mm Stud Type Terminal Block in Blue colour 100
CBS4UBK 10 sq.mm Stud Type Terminal Block in Black colour 100
CBS4UGN 10 sq.mm Stud Type Terminal Block in Green colour 100

 

Download

Connectwell CBS4U StudBolt Clamps Screw Clamp Terminal Blocks-DpstarGroup

Reviews

There are no reviews yet.

Be the first to review “Screw Clamp Terminal Blocks – Stud / Bolt – Connectwell CBS4U”

Your email address will not be published.