Connectwell CSB4/N4U – Screw Clamp Terminal Blocks – Stud / Bolt

Feature

M4 sized Stud Type Terminal Blocks, suitable for operation with screwdriver and nut driver.

This Terminal Block is preferred for applications where the connections are subjected to severe vibrations.

The wire is crimped to a ring / fork type lug (ferrule) and is screwed on to the flat current bar on the Terminal Block. cross connection can be achieved with the aid of internal shorting links.

It is recommended to use Protective Covers in transparent plastic to fully shroud these assemblies. Wiring can be done with the help of screw driver as well as nut driver.

 

Enquiry
Category:

Connectwell CSB4/N4U Screw Clamp Terminal Blocks feature M4-sized stud type terminals, ideal for secure connections in environments prone to strong vibrations. These terminal blocks accommodate wire connections crimped to ring or fork-type lugs (ferrules), which are then screwed onto the flat current bar of the terminal block. Internal shorting links enable convenient cross-connection. For added safety, it’s advisable to use transparent plastic protective covers to fully encase these assemblies. Wiring can be easily accomplished using either a screwdriver or nut driver.

Specification

 

TECHNICAL DATA

Rated Voltage 1100 V
Rated Current 57 A
Tightening Torque 1.2 Nm
Housing Material Polyamide
Product Function Feed Through
Wire Entry Orientation Side entry
Mounting Possibility DIN 32/DIN 35/DIN 35-15 Rail
Stud Size M4
Operated by Screw Driver / Nut Driver
Rated Surge Voltage 8 KV
Pollution Degree 3

CONNECTION DATA

Conductor Cross Section Stranded min. 1.5 mm²
Conductor Cross Section Stranded max. 10 mm²
Conductor Cross Section AWG/Kcmil min 16 AWG
Conductor Cross Section AWG/Kcmil max 6 mm²
Conductor Cross Section Stranded with Ferrule/Lug min 1.5 mm²
Conductor Cross Section Stranded with Ferrule/Lug max 10 mm²
2 Conductors with same Cross Section Stranded min 1.5 mm²
2 Conductor with same Cross Section Stranded max 10 mm²
Stripping Length mm

DIMENSIONS

Height mm
Height with DIN 32 rail 42.7 mm
Height with DIN 35 x 15 mm rail 45.5 mm
Height with DIN 35 x 7.5 mm rail 38 mm
Length 48.9 mm
Width (Thickness) 13 mm

Ordering Code

CAT. NO. DESCRIPTION STD. PACK
CSB4/N4U 10 sq.mm Stud Type Terminal Block in Grey colour 100
CSB4/N4UR 10 sq.mm Stud Type Terminal Block in Red colour 100
CSB4/N4UY 10 sq.mm Stud Type Terminal Block in Yellow colour 100
CSB4/N4UBU 10 sq.mm Stud Type Terminal Block in Blue colour 100
CSB4/N4UBK 10 sq.mm Stud Type Terminal Block in Black colour 100
CSB4/N4UGN 10 sq.mm Stud Type Terminal Block in Green colour 100

Download

Connectwell CSB4/N4U StudBolt Clamps Screw Clamp Terminal Blocks-DpstarGroup