Screw Clamp Terminal Blocks – Stud / Bolt – Connectwell STH4

Feature

6 sq. mm Stud Type Terminal Block – with captive nuts.

These Terminal Blocks are preferred for applications where the connections are subjected to severe vibrations.The wire is crimped to ring /fork type Lug (Ferrule) and is screwed on to flat current bar on the Terminal Block. The fastening nut always remains captive in the hinged plastic carrier. The Hinged Carrier should be lifted to insert the lugs and then snapped back into position. The nut can then be fastened to complete the connection. By the virtue of the hinged design the Terminal Blocks apart from shrouding the live parts, providing IP20 protection, saves considerable time in wiring.

 

Enquiry
Category:
6 sq. mm Stud Type Terminal Block – with captive nuts.

These Terminal Blocks are preferred for applications where the connections are subjected to severe vibrations.The wire is crimped to ring /fork type Lug (Ferrule) and is screwed on to flat current bar on the Terminal Block. The fastening nut always remains captive in the hinged plastic carrier. The Hinged Carrier should be lifted to insert the lugs and then snapped back into position. The nut can then be fastened to complete the connection. By the virtue of the hinged design the Terminal Blocks apart from shrouding the live parts, providing IP20 protection, saves considerable time in wiring.

Specification

 

TECHNICAL DATA

Rated Voltage 1000 V
Rated Current 41 A
Tightening Torque 1.2 Nm
Housing Material Polyamide
Product Function Feed Through
Wire Entry Orientation Side Entry
Mounting Possibility DIN 32/DIN 35/DIN 35-15 Rail
Stud Size M4
Operated by Screwdriver
Rated Surge Voltage 8 KV
Pollution Degree 3

CONNECTION DATA

Conductor Cross Section Stranded min. 1.5 mm²
Conductor Cross Section Stranded max. 6 mm²
Conductor Cross Section AWG/Kcmil min 22 AWG
Conductor Cross Section AWG/Kcmil max 8 AWG
2 Conductors with same Cross Section Stranded min 1.5 mm²
2 Conductor with same Cross Section Stranded max 6 mm²
Conductor Cross Section Solid min 1.5 mm²
Conductor Cross Section Solid max 6 mm²

DIMENSIONS

Height with DIN 32 rail 56.4 mm
Height with DIN 35 x 15 mm rail 59 mm
Height with DIN 35 x 7.5 mm rail 52.2 mm
Length 46 mm
Width (Thickness) 11 mm

Ordering Code

CAT. NO. DESCRIPTION STD. PACK
STH4 6 Sq.mm Hinge Type Terminal Block in Grey Colour 50
STH4R 6 Sq.mm Hinge Type Terminal Block in Red Colour 50
STH4Y 6 Sq.mm Hinge Type Terminal Block in Yellow Colour 50
STH4BU 6 Sq.mm Hinge Type Terminal Block in Blue Colour 50
STH4GN 6 Sq.mm Hinge Type Terminal Block in Green Colour 50
STH4BK 6 Sq.mm Hinge Type Terminal Block in Black Colour 50

 

Download

Connectwell STH4 StudBolt Clamps Screw Clamp Terminal Blocks-DpstarGroup

Reviews

There are no reviews yet.

Be the first to review “Screw Clamp Terminal Blocks – Stud / Bolt – Connectwell STH4”

Your email address will not be published.