Silicon Carbide Heating Elements – Maltec-H Type U3

Features

  • Withstands as high as 1600 (surface temperature)
  • Generates high heat output per unit surface area, approximately 5-10 times the output of Nichrome wire.
  • High strength and excellent shock resistance.
  • Chemically very stable.
  • Heat source is free of noise and air pollution.
  • Various coating products are available for protection against water vapor and harmful gas atmosphere.
  • Easy to handle.
  • Standard: IEC 60675
Enquiry

This was designed by modifying and integrating the tip of the type U heating element to generate the heat uniformly and enable the input of greater electric power, resolving the temperature decrease at the tip area by doing so. While there is a limit in dimension for manufacturing reasons, the electric specifications are the same as type U. You are recommended to use it in a vertical position, as the tip portion is heated.

Specification

Characteristics Items Unit Type
U U3 M E2, F2, U2 SDL
Apparent Density 3.2 3.2 3.2 3.2 3.2
Bulk Density 2.48 2.5 2.48 2.58 2.48
Apparent Porosity % 23 22 23 20 23
Bending Strength Mpa at 25°C 50 70 50 60 50
Specific Heat KJ/KG · °C at 25°C ~ 1300°C 1.0 1.0 1.0 1.0 1.0
Heat Conductiviity W/m · °C at 1000°C 14 ~ 19 14 ~ 19 14 ~ 19 14 ~ 19 14 ~ 19
Specific Resistance Ω cm at 1000°C 0.08 0.10 0.08 0.08 (E2, U2) |0.10 (F2) 0.08
Coefficient of Thermal Expansion 1000°C (x10⁻⁶/°C 4.5 4.5 4.5 4.5 4.5
Max operating temperature in the furnace chamber °C 1400 1400 1400 1400 1400
Standard IEC 60675

Download

Maltec-H-Type-U3-Silicon-Carbide-Heating-Elements_DpstarGroup