Temperature & Relative Humidity Data Logger With USB And Display – Lascar EL-USB-2-LCD

Features

  • -35 to +80°C (-31 to +176°F) and 0 to 100%RH measurement range
  • Stores over 16,000 readings for both temperature and humidity
  • EasyLog software available as a free download
  • High contrast LCD, with two and a half digit temperature and humidity display function
  • Logging rates between 10 seconds and 12 hours
  • Immediate, delayed and push-to-start logging
  • User-programmable alarm thresholds for both temperature and humidity
  • Status indication via red/green LEDs
  • Environmental protection to IP67
Enquiry
Categories: ,

This standalone data logger measures over 16,000 readings over a -35 to +80°C (-31 to +176°­­F) and 0 to 100% humidity (RH) range. At the touch of a button, use the on-board display to cycle between the current, minimum and maximum temperature logs seen during the session for both temperature and humidity. Easily set up the logger and view downloaded data by plugging the unit into a PC’s USB port and using the free EasyLog software provided. Data can then be graphed, printed and exported to other applications for detailed analysis. Supplied with ½ AA battery and wall mount clip.

Applications

The EL-USB-2-LCD is suitable for a wide variety of applications. These include:

  • Facilities Management
  • Housing & Business Premises
  • Outside Environmental Data
  • Agriculture & Animal Welfare
  • Veterinary
  • Museums & Exhibitions

Specification

Temperature
Measurement range -35°C to 80°C (-31°F to 176°F)
Internal resolution 0.5°C (1°F)
Accuracy (overall error) 0.55°C (1.04°F) typical (5 to 60°C)
Long term stability <0.02°C (0.04°F) / year
Relative Humidity
Measurement range 0 to 100%RH
Internal resolution 0.5%RH
Accuracy (overall error) 2.25%RH typical (20 to 80%RH)
Long term stability <0.25%RH / year
Logging Rate User selectable between 10 seconds and 12 hours
Battery Life 2 Years
Calibration Certificate Available Separately

Download

Lascar EL USB 2 LCD Temp RH Data Logger with USB and Display_DpstarGroup