ACI Nickel RTD Duct Without Box

Features

  • 1/4″ diameter stainless steel probe with etched Teflon lead wires.
  • Designed to be used in smaller duct applications and includes an insulation pad for properly sealing your duct.
  • The sensor length should be determined by the actual width or diameter of your duct
  • This series can be ordered with optional plenum-rated cable in standard lead lengths.
Enquiry

Automation Components, Inc. (ACI) creates, manufactures, and distributes building automation sensors for the heating, ventilation, and air conditioning (HVAC) Industry. Dpstar is ACI Authorised Distributor in Malaysia. Our product lines include Temperature Sensors, Relative Humidity Sensors, Current Sensors, Pressure Sensors, Gas Sensors, and Wireless Sensors.

The ACI Nickel Duct without Box series features a 1/4″ diameter stainless steel probe with etched Teflon lead wires. The sensors in this series are manufactured using ACI’s proven double encapsulation process to eliminate the effects of moisture upon the sensors as well as increased thermal response times using our high-quality, thermally conductive epoxy. The duct-style sensor is a single-point sensor designed to be used in smaller duct applications and includes an insulation pad for properly sealing your duct as well as to dampen vibration. For best results, the sensor length should be determined by the actual width or diameter of your duct such that the tip of the probe is in the approximate center of the duct. On larger ducts, you may want to refer to our Rigid or Bendable Copper Averaging sensor for increased sensing points and better temperature control. This series can be ordered with optional plenum-rated cable in standard lead lengths.

Dimension

Applications

  • Roof Top Units
  • Air Handlers
  • Monitoring Supply/Discharge/Return/Mixed Air Temperatures

The ACI Nickel RTD Duct Without Box is covered by ACI’s Five (5) Year Limited Warranty.

Specification

Sensor Type | Sensor Curve Nickel RTD | PTC (Positive Temperature Coe cient)
Number Sensing Points One
Number Wires Two (Non-Polarity Sensitive)
Sensor Output @ 21.1ºC (70ºF) | Lead Wire Colors 1000 Ohms nominal | Red/Red
Sensor Accuracy -40ºC (-40ºF): +/- 1.52ºC (+/- 2.73ºF)
0ºC (32ºF): +/- 0.4ºC (+/- 0.72ºF)
21.1ºC (70ºF): +/- 0.17ºC (+/- 0.34ºF))
54.4ºC (130ºF): +/- 0.56ºC (1.00ºF)
121ºC (250ºF): +/- 1.25ºC (+/- 2.25ºF)
Din Standard | Temperature Coe cient (0-100ºC) Din 43760 | 6370 ppm/ºC
Sensor Stability +/- 0.05% after 1000 Hours @ 150ºC (302ºF)
Response Time (63% Step Change) 8 Seconds nominal
Operating Temperature Range -40 to 115ºC (-40 to 239ºF)
Storage Temperature Range -40 to 85ºC (-40 to 185ºF)
Operating Humidity Range 10 to 95% RH, non-condensing
Probe Material | Flange Material 304 Stainless Steel | Galvanized Steel
Fitting Material | Flammability Rating Polyamide 66 (High Performance Nylon) | UL94-HB
Foam Pad Material | Flammability Rating Neoprene/EPDM/SBR Polymer | UL94-HBF; FMVSS-302; MIL-R-6130C
Lead Length | Conductor Size 4”, 6” & 8” Probes: 14” (35.6 cm) | 12” & 18” Probes: 24” (61cm) | 22 AWG (0.65mm)
Lead Wire Insulation | Wire Rating Etched Te on (PTFE) Colored Leads | MIL-W-16878/4 (Type E)
Conductor Material Silver Plated Copper
Probe Diameter 0.250” (6.35mm)
Product Dimensions | Product Weight See table on back of Product Data sheet
Agency Approvals CE, RoHS2, WEEE

Download

ACI Nickel RTD Duct Without Box_DpstarGroup