ACI Thermistor Rigid Probe Averaging

Features

  • ¼” Diameter stainless steel sensing element with two, 12 inch, 22 AWG Etched Teflon colored lead wires.
  • 4 sensing points in lengths from 12” to 48”.
  • The rigid averaging sensors will provide a better average temperature of the air inside the duct when compared to a single-point sensing element.
  • Each of the elements is hermetically sealed to prevent any moisture intrusion and includes an integrated foam pad to properly seal the duct and dampen vibrations when installed.
  • Mounts like a standard single-point duct sensor but include three additional sensing points for better control.
  • The sensor length should be determined by the size of your duct.
  • This series can be ordered with optional NEMA/IP rated weatherproof enclosures as referenced in the ordering grid.
Enquiry
Category:
Love0

Automation Components, Inc. (ACI) creates, manufactures, and distributes building automation sensors for the heating, ventilation, and air conditioning (HVAC) Industry. Dpstar is ACI Authorised Distributor in Malaysia. Our product lines include Temperature Sensors, Relative Humidity Sensors, Current Sensors, Pressure Sensors, Gas Sensors, and Wireless Sensors.

The ACI Thermistor Rigid Averaging Series features a ¼” Diameter stainless steel sensing element with two, 12 inch, 22 AWG Etched Teflon colored lead wires to differentiate the different sensor types. The sensors in this series are manufactured with 4 sensing points in lengths from 12” to 48”. The rigid averaging sensors will provide a better average temperature of the air inside the duct when compared to a single-point sensing element. Each of the elements is hermetically sealed to prevent any moisture intrusion and includes an integrated foam pad to properly seal the duct and dampen vibrations when installed. The benefit of using the rigid averaging sensor is that it mounts like a standard single-point duct sensor but includes three additional sensing points for better control. The sensor length should be determined by the size of your duct. Our standard enclosures include the galvanized junction box “-GD” or plastic duct enclosure “-PB” with the hinged cover depending on your preference. This series can be ordered with optional NEMA/IP rated weatherproof enclosures as referenced in the ordering grid.

Applications

  • Air Handlers
  • Roof Top Units
  • Mixed Air/Discharge/Supply/Return Air Temperature Monitoring
  • Data Centers
  • Hospitals

The ACI Thermistor Rigid Probe Averaging Series is covered by ACI’s Five (5) Year Limited Warranty.

Specification

Sensor Type | Sensor Curve Thermistor | Non-Linear, NTC (Negative Temperature Coe cient)
Number Sensing Points Four
Number Wires Two (Non-Polarity Sensitive)
Sensor Output @ 25ºC (77ºF) (Lead Wire Colors) A/1.8K: 1.8KΩ nominal | (Red/Yellow)
A/3K: 3KΩ nominal | (White/Brown)
A/AN (Type III): 10KΩ nominal | (White/White)
A/AN-BC: 5.238KΩ nominal | (White/Yellow)
A/CP (Type II): 10KΩ nominal | (White/Green)
A/CSI: 10KΩ nominal | (Green/Yellow)
A/10KS: 10KΩ nominal | (White/Blue)
A/10K-E1: 10KΩ nominal | (Gray/Orange)
A/20K: 20KΩ nominal | (Brown/Blue)
A/50K: 50KΩ nominal | (Brown/Yellow)
A/100KS: 100KΩ nominal | (Black/Yellow)
Accuracy 0-70ºC (32-158ºF) +/-0.20ºC (+/-0.36ºF)
Stability Sensor Dependent; Contact ACI for more information on the sensor in question.
Response Time (63% Step Change) 10 Seconds nominal
Power Dissipation Constant 4 mW/ºC except A/1.8K Series = 2 mW; A/100KS Series: 6 mW
Enclosure Temperature Range “-GD” Enclosure: -40 to 115ºC (-40 to 239ºF), Galvanized Steel, NEMA 1 (IP10)
“-PB” Enclosure: -30 to 90ºC (-22 to 194ºF), ABS Plastic, UL94-HB, Plenum Rated
“-BB” Enclosure: -40 to 115ºC (-40 to 239ºF), Aluminum, NEMA 3R (IP14)
“-4X” Enclosure: -40 to 70ºC (-40 to 158ºF), Polystyrene Plastic, NEMA 4X (IP66)
Storage Temperature Range -40 to 85ºC (-40 to 185ºF)
Operating Humidity Range 10 to 95% RH, non-condensing
Probe Material 304 Stainless Steel
Probe Diameter 0.250” (6.35mm)
Fitting Material | Flammability Rating Polyamide 66 (High Performance Nylon) | UL94-HB
Foam Pad Material | Flammability Rating Neoprene/EPDM/SBR Polymer | UL94-HBF; FMVSS-302; MIL-R-6130C
Lead Length | Conductor Size 12” (30.5cm) | 22 AWG (0.65mm)
Lead Wire Insulation | Wire Rating Etched Te on (PTFE) Colored Leads | MIL-W-16878/4 (Type E)
Conductor Material Silver Plated Copper
Product Dimensions | Product Weight See table on back of Product Data sheet
Agency Approvals CE, RoHS2, WEEE

Download

ACI Thermistor Rigid Probe Averaging_DpstarGroup

Related products