High Temperature Infrared Pyrometers – Raytek Endurance Series

Features

  • Single color, two color and fiber optic models
  • Temperature range: 50 to 3200 °C (122 to 5792 °F)
  • Superior optical resolution to 300:1
  • Spot sizes down to 0.6mm (0.02 inch)
  • Fast response times down to 2 ms
  • Easy adjustment with manual variable focus integrated head optics
  • Through-the-lens sighting, with optional laser, LED or video aiming function
  • Compact, rugged housings with IP65 (NEMA-4) rating
  • Ethernet, Profinet and EtherNet/IP options
  • Programmable relay output for control
  • Simultaneous analog and digital outputs
Enquiry
Category:

The Fluke Process Instruments Endurance series has been designed to meet the requirements of modern industry that allows you to integrate with all major control systems quickly, easily and seamlessly. The series are available in single color, two color and fiber optic Endurance models. The innovative Endurance Series of low-temperature and high-temperature two color pyrometers meets all requirements of modern industry: it is flexible and easy-to-install; durable to withstand the most demanding harsh industrial environments; visual – allowing you to see and understand your process temperature data. The innovative optional camera feature for the integrated sensors allows you to continuously monitor your process visually, while the LED sighting option allows you to see the spot size on the target and make sure you have a clean line of sight to the target. The match function takes the guesswork out of setting the emissivity.

Endurance fiber-optic pyrometers allow measurement of targets that would otherwise be inaccessible because of space constraints or harsh environments. Separated by a flexible fiber-optic cable, the optical head may be positioned near the target with the rugged electronics housing installed remotely in a convenient location. Fiber-optic sensors are completely non-conductive and offer improved immunity to RFI and EMI interference. Endurance companion software allows you to archive your process temperatures for data analysis and sensor setup. Endurance meets the requirements of Digital Industry. It is designed to measure product temperature in the harshest of environments and communicate the results back to control system or monitoring stations. This stainless steel housed pyrometer can be specified with the widest range of communication interfaces from rugged analogue isolated input/output through to fast LAN/Ethernet and RS485. The Endurance Series is supported by the best-in-class 4 year warranty.

Accessories

The SpotScan protective enclosure features:

  • Durable housing IP65 enclosure designed to survive in ambient temperatures up to 60°C (140ºF)
  • Air purge option available for use in dusty or dirty environments
  • Sighting achieved with the on board sensor via laser, through-the-lens sighting, LED or video function

The ThermoJacket protective enclosure features:

  • Rugged cast aluminum housing withstands ambient temperatures up to 315ºC (599ºF).
  • Thermal and mechanical environmental protection
  • Air/water cooling and air purge in one unit

Specification

Model / Spectral Response Temperature Range Temperature Range Applications

EF1RL
1.0 µm nominal one/two color

500°C-1100°C
932°F-2012°F
20:1 Metals processing, molten metal forging, hot rolling mills, heat treating and annealing, induction heating, lightbulb and halogen lamp production, cement and lime kilms, vacuum furnaces, thin wires or rods
EF1RM
1.0 µm nominal one/two color
700°C-1500°C
1292°F-2732°F
40:1 Same as above
EF1RH
1.0 µm nominal one/two color
1000°C-3200°C
1832°F-5792°F
65:1 Metals processing, molten metal forging, hot rolling mills, heat treating and annealing, induction heating, lightbulb and halogen lamp production, glass melting, cement and lime kilms, vacuum furnaces, thin wires or rods
EF2RL
1.6 µm nominal one/two color
275°C-1000°C
527°F-1832°F
20:1 Metals processing, molten metal forging, heat treating and annealing, induction heating, cement and lime kilms, vacuum furnaces, thin wires or rods
EF2RH
1.6 µm nominal one/two color
350°C-1300°C
662°F-2372°F

40:1

Metals processing, molten metal forging, heat treating and annealing, induction heating, cement and lime kilms, vacuum furnaces, thin wires or rods
EF1ML
1.0 µm nominal single color
475°C-900°C
887°F-1652°F
20:1 Metals processing, molten metal forging, hot rolling mills, heat treating and annealing, induction heating, glass melting, semiconductor furnaces
EF1MM
1.0 µm nominal single color
800°C-1900°C
1472°F-3452°F
100:1 Same as above
EF1MH
1.0 µm nominal single color
1200°C-3000°C
2192°F-5432°F

100:1

Same as above
EF2ML
1.6 µm nominal single color
250°C-800°C
482°F-1472°F
20:1 Ferrous and non-ferrous metals, galvanizing lines, metals processing, molten metal forging, hot rolling mills, heat treating and annealing, induction heating
EF2MH
1.6 µm nominal single color
400°C-1700°C
752°F-3092°F
40:1 Same as above

Download

Reviews

There are no reviews yet.

Be the first to review “High Temperature Infrared Pyrometers – Raytek Endurance Series”

Your email address will not be published. Required fields are marked *