Maltec-T MT8000-2R RTD Multipoint Sensor – Contacting Fixture Design

Maltec-T MT8000-2R RTD Multipoint Sensor – Contacting Fixture Design

The Maltec-T MT8000-2R Multipoint Sensor is tough and lasts a long time. It usually comes as a 4-wire RTD and can measure up to 12 points. the Maltec-T MT8000-2R is used when a high local resolution is not required. You can get it with or without thermowells.

If your equipment needs an RTD signal, this sensor is the best solution. But if you’re using transmitters and need more measurement points or a wider temperature range, you might want to consider a thermocouple sensor like the Maltec-T MT8000F.

Configuration:

The Maltec-T MT8000-2R offers two different element fixation methods:

1) Radial spring design
This design provides very good thermal contact between the RTD and the thermowell, making it respond quickly. A spring presses the RTD against the inside of the thermowell. If you order it without a thermowell, it will shipped as a coil. The individual RTD elements cannot be replaced.

2) Spacer design
This design uses spacer disks to place the resistance elements correctly. You can’t replace the individual RTD elements and for shipping, the spacer design can’t be coiled up, with or without a thermowell.

Radial Spring and Spacer Design (PT100 RTD)

Dpstar Group is the largest manufacturer of thermocouples based in Malaysia. We design and manufacture a complete line of high-quality standard and custom temperature sensors including thermocouples, RTD’s, thermowells, and float switches as well as a wide selection of temperature accessories. Through our engineering capabilities and 30 years of experience, our trademark brand Maltec-T is the only CE-certified manufacturer for thermocouples in Malaysia. With extensive experience, unique technology, and hard commitment, we become one of the best quality suppliers in the temperature sensors field. We offer a full range of design services to provide you with the benefit of our knowledge and experience.