Lutron DT-2249A – Stroboscopes

Features

  • New generation Stroboscope.
  • Digital synthesis circuit, high stability and high adjustment resolution.
  •  Range : 60 to 32,000 RPM.
  • Adjustment resolution : 0.1 RPM ( 1,000 RPM ), 1 RPM ( 1,000 RPM )
  • High intensity light.
  • Setting button : digital rotate button, X 2 button, 2 button, + button, – button, easy to adjust the desired RPM.
Enquiry
Categories: , , ,
Love0

Lutron DT-2249A Stroboscope is a state-of-the-art device boasting digital synthesis technology and high-intensity lighting. Available in both AC 110V and AC 220V or 230V models, it offers exceptional stability and adjustment precision. With a wide RPM range from 60 to 32,000, users can easily fine-tune the speed with remarkable resolution, whether it’s at 0.1 RPM increments for speeds below 1,000 RPM or 1 RPM for higher speeds. Its user-friendly interface includes a digital rotating button and dedicated controls for doubling or halving the RPM, ensuring effortless adjustments to achieve the desired settings.

Specification

Display 14 mm(0.56″) LED, 5 digits.
Flash adjust range 60 to 30,000 RPM/FPM.
• RPM : round per minute.
• FPM : flash per minute.
Resolution • 100 to 5,000 FPM/RPM) – ± 1 digit.
• Over 5000 FPM/RPM – ± 0.05% .
Resolution • RPM : < 1,000 RPM.
• RPM :≧ 1,000 RPM
Function buttons Digital rotate knob,
• x 2 button, ÷ 2 button,
• + button, – button,
Accuracy ± (0.05 % + 1d)

• Spec. tested under the environment RF Field Strength less than 3 V/M & frequency less than the 30 MHz only.
Signal Stability The signal adjusting circuit is used the digital synthesis circuit, the output signal will existing high stability and not change.
Power Consumption Less than 30 Watt.
Power Supply • 110 Vac ± 10%, 50/60 Hz. or
• 220 Vac ± 10%, 50/60 Hz. or
• 230 Vac ± 10%, 50/60 Hz.
* A ” Voltage rating label ” is affixed under the bottom case to show the voltage rating of power supply. When use the stroboscope make sure to identify the power supply voltage exactly.
Circuit • Microcomputer LSI circuit & crystal control time base.
• Digital synthesis circuit for the signal adjusting.
Operating Temp. 0 to 50 ℃ (32 to 122 ℉).
Operating Humidity Less than 80% R.H.
Dimension 21 x 12 x 12 cm (8.3 x 4.8 x 4.8 inch).
Weight 1Kg/2.2 LB.
Housing Crystal time base and microprocessor circuit, d
on’t necessary take any external calibration process.
Accessories Included • Operation manual……………1 PC.
• Included Power cable…………………..1 PC.

Download

Lutron DT-2249A – Stroboscopes-DpstarGroup

Related products