Terminated Silicon Insulated Heating Cables – Flexelec CS1

Features

  • UL Recognized cables on request.
  • These cables must never be cut to shorten the cold tails.
  • No extra thickness at the cold junction, identified with a black mark.
Enquiry

Through our deep knowledge and experience, we are able to supply electrical heat tracing systems and solutions to achieve both dynamic heat up and temperature maintenance applications in Oil and Gas, Palm Oil, Food Industry, and others. To maintain a static or a moving product at an even temperature, Dpstar provides a wide range of heating cables. We understand your requirements and we are specialists in Electrical Heat Tracing solutions and provide reliable systems and solutions. Dpstar is responsible, trustworthy, and accountable you can count on.

The heater cable is build up with a heating part and a cold part. The heating cable FLEXUNIT could be done with different insulation and options. Our heating cables are used in the refrigeration industry, house appliances, any equipment or machine requiring freeze protection. Dpstar offer a complete range of heating cable, heating, and heater tape with silicon or thermo plastic insulation.

CS1 heating elements are mainly incorporated in household electrical or refrigeration equipment and special, mass-produced machines requiring protection against freezing or temperature maintenance. To ensure that these heating elements enjoy a long service life, we recommend using a control device.

The main characteristic of this type of heating element is that there is no extra thickness at the cold junction, identified with a black mark. UL Recognized cables on request.

Applications

  • Prevent mist, ice, or frost forming with a heating cable.
  • Prevent seals from sticking for refrigeration equipment with heating cable.
  • Keep free from ice and snow the coach entrance vestibules with heating cables.
  • Achieve research and manufacture of new products with the heating elements.
  • Heating resistance for a yogurt maker, refrigerator, towel dryer, and footbath.
  • Heat seals of doors in the cold room with heater cables.

Specification

Model CS1
Heating wire Nickel-Copper or Nickel-Chrome
Diameter 2.3 to 3.5 mm
Max. power 30 W/m
Voltage Any voltage on request up to 500 V
Permissible surface temperature from – 70°C to + 200°C
Tolerances Power : ± 10 %
Diameter : + 0.2 / – 0.1 mm
Length : ± 1 %
Max.current 2 A
Ingress protection code IP 66
Minimum bending radius 6 x the diameter
Insulation Class CLASS 0 (single insulated)
CLASS III (if low Voltage)

Reviews

There are no reviews yet.

Be the first to review “Terminated Silicon Insulated Heating Cables – Flexelec CS1”

Your email address will not be published.