Silicon Insulated Heating Cables – Flexelec CS2 – CS2/T – CS2/TW – CS2I – CS2IW

Features

  • Power cable: standard length: 1 m.
  • CS2: silicon elastomer insulated heating elements.
  • CS2/T: silicon elastomer insulated heating elements with tinned copper braid and earthing conductor.
  • CS2/TW: silicon elastomer insulated heating elements with tinned copper braid for mechanical protection, no earthing conductor.
  • CS2/I: silicon elastomer insulated heating elements with stainless steel braid for mechanical protection and earthing conductor.
  • CS2/IW: silicon elastomer insulated heating elements with stainless steel braid for mechanical protection, no earthing conductor.
Enquiry

Through our deep knowledge and experience, we are able to supply electrical heat tracing systems and solutions to achieve both dynamic heat up and temperature maintenance applications in Oil and Gas, Palm Oil, Food Industry, and others. To maintain a static or a moving product at an even temperature, Dpstar provides a wide range of heating cables. We understand your requirements and we are specialists in Electrical Heat Tracing solutions and provide reliable systems and solutions. Dpstar is responsible, trustworthy, and accountable you can count on.

The heater cable is build up with a heating part and a cold part. The heating cable FLEXUNIT could be done with different insulation and options. Our heating cables are used in the refrigeration industry, house appliances, any equipment or machine requiring freeze protection. Dpstar offer a complete range of heating cable, heating, and heater tape with silicon or thermo plastic insulation.

CS2, CS2/T, CS2/TW, CS2/I and CS2/IW heating cables are mainly used in the household electrical and refrigeration industries and for machines where protection against freezing or temperature maintenance is necessary. To ensure that these heating elements enjoy a long service life, we recommend using a control device.

Characteristics

  • Power cable: standard length: 1 m.
  • CS2: Silicon elastomer insulated cables
  • CS2/T: with tinned copper braid and earthing conductor.
  • CS2/I: with stainless steel braid and earthing conductor.
  • CS2/TW: with tinned copper braid for mechanical protection, no earthing conductor.
  • CS2/IW: with stainless steel braid for mechanical protection, no earthing conductor.
  • Special production on request.

Applications

  • Achieve research and manufacture of new products with the heating elements.
  • Keep free from ice and snow the coach entrance vestibules with heating cables.
  • Prevent seals from sticking for refrigeration equipment with heating cable
  • Prevent mist, ice, or frost forming with heating cable.
  • Heat seals of doors in coldroom with heater cables.
  • Improve casting and drying of plastic and composite materials with heating elements.
  • Heating resistance for yoghurt maker, refrigerator, towel dryer, and footbath.

Specification

Model CS2 CS2/T CS2/I CS2/IW
/ CS2/TW
Heating wire Nickel-Copper or Nickel-Chrome
Diameter 2.3 to 3.5 mm 3 to 4 mm
Max. power 30 W/m
Voltage Any voltage on request up to 500 V
Permissible surface temperature from – 70°C to + 200°C
Tolerances Power : ± 10 %
Diameter : + 0.2 / – 0.1 mm
Length : ± 1 %
Connection insulation Heat-shrink sheath with adhesive
Ingress protection code IP 54
Minimum bending radius 6 x the diameter
Model CS2 – CS2/TW – CS2/IW CS2/T – CS2/I
Insulation Class CLASS 0 (single insulated)
CLASS III (if low voltage)
CLASS I (earthing)

Reviews

There are no reviews yet.

Be the first to review “Silicon Insulated Heating Cables – Flexelec CS2 – CS2/T – CS2/TW – CS2I – CS2IW”

Your email address will not be published.