Pressure Transmitter – Aplisens AS Series

Features

  • Potentiometers for zero and span adjustment
  • Accuracy 0,4%
  • Measuring ranges: 0 ÷ 1; 0 ÷ 2,5; 0 ÷ 6; 0 ÷ 10; 0 ÷ 16; 0 ÷ 25
  • Output signal 4 ÷ 20 mA or 0 ÷ 10 V
  • Process connection 1/2”NPTM, G1/2″, M20×1,5, RG or RM
Enquiry

The pressure transmitter AS is applicable to measurement the pressure of gases vapours and liquids. It may be applied in water supply systems and heat engineering.

The active sensing element is a piezoresistant silicon sensor separated from the medium by a diaphragm and by specially selected type of manometric liquid. The electronics are placed in the casing with a degree of protection IP65. Electrical connection is the connector DIN EN 175301-803.

Specification

Degree of protection IP65
Material of wetted parts 00H17N14M2 (SS316L)
Material of casing 0H18N9 (SS304)
Metrological parameters
Accuracy 0.4%
Hysteresis, repeatability 0.05%
Overpressure limit 4 × range
Thermal compensation range 0 ÷ 70°C
Thermal error 0.2% / 10°C
Long-term stability 0.5% / year
Electrical parameters
Output signal 4 ÷ 20 mA, two wire transmission
0 ÷ 10 V, three wire transmission
Power supply 8…36VDC –two wire transmission
13…30 VDC –three wire transmission
24 V AC
Long-term stability
(for the basic range)
R≥ 20kΩ
Operating conditions
Operating temperature range (ambient temp.) -25÷80°C
Medium temperature range -25÷120°C –direct measurement
-25÷170°C –measurement using animpulse line

Download

Aplisens AS Pressure transmitter-DpstarGroup

Reviews

There are no reviews yet.

Be the first to review “Pressure Transmitter – Aplisens AS Series”

Your email address will not be published.