TTK FG-ECP-M Water Point Sensor


  • Compatible with Digital Systems
  • Immediate Leak Detection
  • Instant Acknowledgment
  • IP68 Protection Marking

TTK FG-ECP-M is a Point Sensor for water leak detection equipped with two stainless steel probes. It is designed and ideally suited for high humidity environments or for zones where leaks are frequent. With its ingenious design of two probes being separated by 2 centimetres, it offers particularly good resistance to the false alarms caused by the humidity, at the same time, it triggers simultaneously an alarm when both probes are in the contact with leaking water. It is designed to be used with TTK Digital Units FG-SYS or FG-NET to give instant detection of liquid leaks. In the event of a liquid leak on the FG-ECP-M, the digital unit will respond as follows:

  • An audible alarm is triggered and a relay is activated.
  • The location of the leak (address of the FG-ECP-M) and details of the fault (the type of alarm: leak or cable break) are displayed on the screen.
  • The event report is sent to the BMS via MODBUS /JBUS protocol.


Compatibility  Digital units: FG-SYS, FG-NET, FG-BBOX
Enclosure  ABS flame retardant UL94V0
Operating Temperature  0°C to 50°C
Stainless Steel Probes Diameter Ø20mm
Protection Rating IP 68
FG-ECP-M Colour Blue
Dimensions (W,H,D)  105mm x 75mm x 55mm

Identification Codes

FG-ECP-M Point sensor with stainless steel probes
FG-NET Digital Touchscreen Leak Detection Panel 100-240VAC
FG-SYS  FG-SYS digital unit wall mounted in metal enclosure
FG-BBOX FG-NET’s Satellite Device – 2 Circuits Black Box (wall mounted) 100-240VAC
TTK BUS 8723 Jumper Cable


TTK FG-ECP-M Water Point Sensor_DpstarGroup