Flexelec CS1 – Terminated Silicon Insulated Heating Cables

Features

  • UL Recognized cables on request.
  • These cables must never be cut to shorten the cold tails.
  • No extra thickness at the cold junction, identified with a black mark.
Enquiry

Flexelec CS1 – Terminated Silicon Insulated Heating Cables are primarily integrated into household electrical or refrigeration appliances as well as specialized, mass-produced machinery that necessitates protection against freezing or temperature maintenance. To ensure a prolonged service life for these heating elements, it’s advisable to utilize a control device.

The heater cable consists of a heating component and a cold section. The FLEXUNIT heating cable can be customized with various insulation and options. Our heating cables find applications in the refrigeration industry, household appliances, and any equipment or machinery requiring freeze protection. dpstar offers a comprehensive range of heating cables, heating, and heater tape with either silicon or thermoplastic insulation.

A key characteristic of this type of heating element is the absence of additional thickness at the cold junction, which is denoted by a black mark. UL Recognized cables are available upon request.

Applications

  • Prevent mist, ice, or frost forming with a heating cable.
  • Prevent seals from sticking for refrigeration equipment with heating cable.
  • Keep free from ice and snow the coach entrance vestibules with heating cables.
  • Achieve research and manufacture of new products with the heating elements.
  • Heating resistance for a yogurt maker, refrigerator, towel dryer, and footbath.
  • Heat seals of doors in the cold room with heater cables.

Through our deep knowledge and experience, we are able to supply electrical heat tracing systems and solutions to achieve both dynamic heat up and temperature maintenance applications in Oil and Gas, Palm Oil, Food Industry, and others. To maintain a static or a moving product at an even temperature, Dpstar provides a wide range of heating cables. We understand your requirements and we are specialists in Electrical Heat Tracing solutions and provide reliable systems and solutions. Dpstar is responsible, trustworthy, and accountable you can count on.

Specification

Model CS1
Heating wire Nickel-Copper or Nickel-Chrome
Diameter 2.3 to 3.5 mm
Max. power 30 W/m
Voltage Any voltage on request up to 500 V
Permissible surface temperature from – 70°C to + 200°C
Tolerances Power : ± 10 %
Diameter : + 0.2 / – 0.1 mm
Length : ± 1 %
Max.current 2 A
Ingress protection code IP 66
Minimum bending radius 6 x the diameter
Insulation Class CLASS 0 (single insulated)
CLASS III (if low Voltage)